What is infill in 3D printing?
Short answer
Infill is the internal structure printed inside a 3D part. It controls strength, weight, flexibility, material use, and print time, so the right density and pattern depend on the job.
Key points
- Infill fills the interior with a lattice instead of solid material.
- Density is usually set from 0% to 100% in slicer software.
- Common patterns include cubic, grid, and gyroid.
- Shell thickness can add strength without raising density.
- Hollow prints at 0% work for light decorative objects.
What is infill in 3D printing? It is the internal lattice that fills the space inside a printed object. Instead of making the whole part solid, the printer builds outer walls and an interior pattern. That pattern gives the part strength, weight, and durability while using less filament and less time.
Infill is a geometric structure that you choose in slicer software before printing. The right choice can make a part light and quick to print, or strong enough for regular use.
What is infill in 3D printing used for?
Infill gives a printed part properties such as strength, durability, weight, and flexibility. It also reduces print time and material use by replacing solid material with a lattice. Without it, a solid part would be wasteful and slow, while a hollow one may lack strength. The exact benefit depends on the object and the strength it needs.
Infill patterns are needed for some objects, especially those requiring strength or sturdiness. At the same time, infill should be chosen with the final use in mind rather than left at a default value.
How infill density changes a print
Infill density is the amount of material printed inside the object, and it directly affects strength, weight, and printing duration. A 0% setting leaves the part hollow, which works for flat, simple, or decorative prints. Decorative pieces often use around 15%, while functional items use 50% or more. For everyday parts that need to hold up without extreme durability, 20% to 40% is a common range. Mechanical parts at around 30% can be sturdy enough for regular use without taking too long.
| Density | Typical use | Result |
|---|---|---|
| 0% | Hollow decorative or simple prints | Lowest material and time |
| 15% | Decorative pieces | Light handling strength |
| 20-40% | Everyday parts, brackets, organizers | Balance of strength and efficiency |
| 50% or more | Functional or stressed parts | Higher strength and weight |
| 100% | Solid parts | Maximum density and longest time |
If you sell printed items, test different percentages and compare costs and time with profit margins. The percentage you choose depends on how well the print must resist pressure, torque, and time.
Common infill patterns
Patterns are the internal structure you would see if a finished model were sliced open. Lines run in one direction and print quickly at low cost, but they provide less strength. Grids use two-way crossing lines and add strength while still printing quickly with less material. Cubic infill suits high-stress parts that do not need to be fully solid. Cubic, grid, and gyroid patterns cover most printing needs. The best pattern depends on the object and the strength required.
Art infill
Infill can also be used creatively. Art infill uses patterns to create striking visual effects in a print. This is a design choice rather than a strength choice, but it still depends on the same slicer settings.
Can you print without infill?
Yes, but it depends on what you are printing. Shell-only printing is possible and useful for lightweight objects such as vases or decorative pieces, especially with spiral vase mode. Without infill, the outer walls need enough thickness to maintain strength. Hollow prints at 0% suit mostly flat, very simple prints and some decor or prototypes.
Shell thickness and material quality
Thicker shells make a part stronger. A part can become sturdier and better able to handle stress without raising infill density. Good quality filament also helps when maximizing strength while using less material. With better filament, prints can be stronger, and lower or no infill can use less material and save time. This is a useful trade when the design allows thicker walls.
Choosing settings for your project
There is no single best setting. Do not default to a 20% density grid infill for every job. Consider the specific print, its load, its weight target, and its finish. For prototypes used only for fit testing, lowering infill to 15% saves material while still providing enough stability for handling. Grid infill offers enough support for many routine prints without greatly increasing print time. Variable density is another option in some slicers, allowing denser regions only where needed.
Infill in different printing processes
In FDM printing, infill is a routine part of preparing a model because the printer builds the object layer by layer. See How Does FDM 3D Printing Work? A Clear Guide. In resin printing, the process and support strategy differ, so interior structure is handled differently. See What Is SLA 3D Printing? A Clear Guide. The term infill is most closely tied to filament-based printing.
Questions people also ask
Can you 3D print without infill?
Yes. Hollow or shell-only prints work well for lightweight decorative objects, vases, and some prototypes, but the outer walls must be thick enough to keep the part usable.
Does higher infill always make a part stronger?
Higher density usually increases strength and weight, but shell thickness, pattern, and filament quality also matter. A thicker wall can sometimes add strength without raising density.
Which infill pattern is best?
Cubic, grid, and gyroid patterns meet most needs. Lines are faster but weaker, grids are stronger, and cubic suits high-stress parts where solid infill is not needed.
Is 100% infill the same as a solid part?
A 100% setting fills the interior as densely as the pattern allows, giving maximum density and the longest print time. It is usually unnecessary unless the part must be solid.
What infill should a beginner use?
A moderate density such as 20% to 30% with a common pattern is a practical starting point for everyday parts, then adjust based on strength, weight, and print time.
Related pages
- What is the history of 3D printing? Key milestones
3D printing has existed in concept since 1945 and in practice since the 1970s, with practical machines appearing in the mid-1980s. Open-source projects, corporate mergers, and construction uses then widened its reach from factories to homes and building sites.
- Difference Between SLA and FDM 3D Printing Explained
SLA builds parts by curing liquid photopolymer resin with UV light, while FDM builds parts by melting and extruding plastic filament. SLA usually gives smoother surfaces and finer detail; FDM usually gives lower cost, more material choices, and stronger functional parts.
- What Is a 3D Printing Slicer? A Guide
A 3D printing slicer is software that converts a 3D model into printer instructions called G-code. It divides the model into layers and sets parameters such as layer height, infill, supports, and temperatures. The output file tells the printer where to move, how much material to extrude, and when to heat or cool.
- What Is SLS 3D Printing? A Clear Guide
SLS 3D printing is an additive manufacturing process that uses a laser to fuse thermoplastic powder into solid parts. It needs no support structures, handles complex geometry well, and is common in industrial prototyping and low-volume production.
- How Does FDM 3D Printing Work? A Clear Guide
FDM 3D printing builds objects by heating filament, pushing it through a nozzle, and placing it in thin layers that bond as they cool. It is common in both workshops and factories, with desktop build volumes near 200 mm per side and industrial machines near 1,000 mm per side.
- What Is SLA 3D Printing? A Clear Guide
SLA 3D printing, or stereolithography, builds solid parts by curing liquid photopolymer resin with a focused ultraviolet laser, one thin layer at a time. It is valued for smooth surfaces, fine detail, and tight tolerances, but it needs washing, support removal, and UV post-curing before use. This page explains the process, materials, benefits, limits, and common applications.
How this page was prepared
Before writing, the topic was researched in the sources below. The page then passed automatic quality checks.