What is the history of 3D printing? Key milestones
Short answer
3D printing has existed in concept since 1945 and in practice since the 1970s, with practical machines appearing in the mid-1980s. Open-source projects, corporate mergers, and construction uses then widened its reach from factories to homes and building sites.
Key points
- The idea dates to 1945, with a first patent in the 1970s.
- Practical machines appeared in the mid-1980s.
- RepRap's 2005 Darwin machine helped bring printing to homes.
- Stratasys and Objet merged on April 16, 2012.
- Construction and repair uses expanded by 2019.
What is the history of 3D printing?
What is the history of 3D printing? It stretches from a 1945 science-fiction idea and 1970s patents to mid-1980s machines, open-source home printers, and billion-dollar mergers. The technology moved from factory floors to desktops and construction sites in roughly four decades. While 3D printing is relatively new, its history is deep, varied, and still evolving.
From idea to patent: 1945 to the 1970s
The concept is older than the machines. In 1945, Murray Leinster's short story 'Things Pass By' described feeding plastic into a moving arm that made drawings in the air and hardened as it moved, which reads like an early sketch of additive manufacturing. A 1970s patent covered a process known as a Liquid Metal Recorder. By 1971, practice had begun, however primitive the equipment was.
In manufacturing terms, 3D printing builds objects by stacking thin cross-sections layer by layer, much as a printer fuses ink or toner to paper.
The first practical machines: mid-1980s
Practical 3D printing began in the mid-1980s. Early industrial printers were large and aimed at manufacturing rather than home use. The first decade produced companies that later became major names. 3D Systems and Stratasys trace roots to that period, and EOS emerged in the same era, though all were small compared with the valuations they later reached.
The machines changed shape over the next 30 years. Equipment once the size of small cranes gave way to systems used for medical and housing goals, along with broader manufacturing uses. The same span saw 3D printing framed as a possible answer to organ shortages and the housing crisis, while also promising the democratization of manufacturing.
Two common methods are SLA and FDM. See Difference Between SLA and FDM 3D Printing Explained for how those two methods differ.
Companies, patents, and early growth
Patents shaped the early market. 3D Systems and Stratasys were among the first companies to file patents, which helped them control the technology in its first phase. Later, MakerBot took a different path by making the technology open source, so more people could build a 3D printer.
One of the four original founders of 3D printing companies, Carl Deckard, died on December 23, 2019, at age 59. He invented Selective Laser Sintering and held 27 patents. He was the most significant figure in the field to die by that point. See What Is SLS 3D Printing? A Clear Guide for the process behind his invention.
In the mid-1990s, those firms were relative minnows compared with the billion-dollar valuations they now possess.
Milestone timeline
| Year | Event |
|---|---|
| 1945 | Concept appears in Murray Leinster's 'Things Pass By' |
| 1970s | First patent for a Liquid Metal Recorder |
| 1971 | Practice begins, however primitive |
| Mid-1980s | First practical industrial printers |
| 2005 | RepRap Darwin machine |
| April 16, 2012 | Stratasys and Objet merge |
| 2019 | Apis Cor prints wall structures in Dubai; Carl Deckard dies |
Open source and the home printer boom
The 2005 RepRap project changed access. Dr. Adrian Bowyer, then a senior lecturer from the University of Bath, had been inspired by 3D printing and proposed machines that could build copies of themselves. The project led to the Darwin machine, able to print most of its own parts. That idea turned self-replication from theory into a working design.
Darwin became the first working expression of RepRap's philosophy, suggesting that individuals, not only factories, could make what they designed. Kickstarter, launched at about the same time, gave home 3D printing another lift as crowdfunded projects spread. Manufacturing was becoming more open.
Low cost became credible. The RepRap printer showed that inexpensive machines were possible and that most printer parts could be printed by another printer. That result mattered more to everyday users than many corporate announcements.
Consumer use also carried a repair promise. If a broken part in an old vacuum cleaner is no longer in production, but the design file still exists on the manufacturer's website, a user can send it to a desktop device and learn installation from a short video. The idea was less built-in obsolescence and more local repair. Design choices such as infill affect strength and material use; see What is infill in 3D printing? for a basic explanation.
Mergers and a changing industry
Corporate deals reshaped the field. Objet Geometries had grown since the early 2000s by improving PolyJet technology, which could print in full color. That progress led to a major acquisition: on April 16, 2012, Stratasys announced a merger with Objet in an all-stock transaction. Stratasys survived as the company, owned 55 percent of the new firm, and Objet owned 45 percent. The combined company was worth $3 billion at the time.
For everyday fans, two events stand out: the RepRap printer and the Stratasys-Objet merger. The first proved low-cost machines could work. The second showed how quickly the industry could consolidate.
Construction and everyday repair
3D printing moved beyond small parts. In 2019, Boston-based Apis Cor used its own machine and material mixture to 3D-print wall structures for an administrative building in Dubai. The project showed that additive methods could address building-scale work, not just prototypes.
The same period kept the consumer promise alive. Desktop machines, open-source designs, and online file sharing made it easier to replace a missing part or test a new shape at home. The result was a split market: industrial systems for production and smaller machines for experiments and repairs.
Where the field is now
The history is still being written. The technology is about 80 years old in theory, about 40 years old in practice, and still looks new to many users. Concurrent development has pushed it toward consumer use and enterprise use at the same time, with applications in construction, architecture, design, and manufacturing.
The main lesson is continuity. A 1945 idea, a 1970s patent, mid-1980s machines, a 2005 open-source printer, and a 2012 merger all point to the same process: building objects layer by layer. The tools changed; the core idea did not. A slicer turns a model into layers; see What Is a 3D Printing Slicer? A Guide for that step.
Questions people also ask
When did 3D printing start?
The concept dates to 1945, a first patent to the 1970s, and practical machines to the mid-1980s.
What was RepRap?
RepRap was a 2005 open-source project that produced the Darwin machine, a printer that could print most of its own parts.
Why did the Stratasys and Objet merger matter?
It combined two major companies and created a firm worth $3 billion at the time.
Is 3D printing only for factories?
No. Open-source projects, crowdfunding, and desktop machines brought it into homes, while construction projects showed larger uses.
Related pages
- Difference Between SLA and FDM 3D Printing Explained
SLA builds parts by curing liquid photopolymer resin with UV light, while FDM builds parts by melting and extruding plastic filament. SLA usually gives smoother surfaces and finer detail; FDM usually gives lower cost, more material choices, and stronger functional parts.
- What Is a 3D Printing Slicer? A Guide
A 3D printing slicer is software that converts a 3D model into printer instructions called G-code. It divides the model into layers and sets parameters such as layer height, infill, supports, and temperatures. The output file tells the printer where to move, how much material to extrude, and when to heat or cool.
- What is infill in 3D printing?
Infill is the internal structure printed inside a 3D part. It controls strength, weight, flexibility, material use, and print time, so the right density and pattern depend on the job.
- What Is SLS 3D Printing? A Clear Guide
SLS 3D printing is an additive manufacturing process that uses a laser to fuse thermoplastic powder into solid parts. It needs no support structures, handles complex geometry well, and is common in industrial prototyping and low-volume production.
- How Does FDM 3D Printing Work? A Clear Guide
FDM 3D printing builds objects by heating filament, pushing it through a nozzle, and placing it in thin layers that bond as they cool. It is common in both workshops and factories, with desktop build volumes near 200 mm per side and industrial machines near 1,000 mm per side.
- What Is SLA 3D Printing? A Clear Guide
SLA 3D printing, or stereolithography, builds solid parts by curing liquid photopolymer resin with a focused ultraviolet laser, one thin layer at a time. It is valued for smooth surfaces, fine detail, and tight tolerances, but it needs washing, support removal, and UV post-curing before use. This page explains the process, materials, benefits, limits, and common applications.
How this page was prepared
Before writing, the topic was researched in the sources below. The page then passed automatic quality checks.