IP Rating Smartphones: What Water Resistance Means
Short answer
An IP rating is a standardized code for how well a phone resists dust and water. The first digit covers solids, the second covers liquids, and higher numbers mean stronger protection. It is a test result on a new device, not a promise against every kind of water damage.
Key points
- IP stands for Ingress Protection under IEC 60529.
- The first digit rates dust sealing; the second rates water resistance.
- IP67 and IP68 are common smartphone ratings for dust-tight phones that survive brief immersion.
- An X means that category was not tested or claimed.
- Seals degrade, so ratings apply to new devices and do not cover drops or saltwater.
What an IP rating actually measures
An IP rating is a standardized code for ingress protection. IP stands for Ingress Protection; the code comes from the IEC 60529 standard. It rates how effectively a device blocks solid particles such as dust and sand, and liquids such as water. Solids are rated by the first digit and liquids by the second. This gives a testable number instead of the vague word waterproof, which has no standardized meaning in product labeling.
IP rating smartphones: how the two digits work
When shoppers compare IP rating smartphones, the two digits are the part that matters. A first digit of 6 means no dust enters under test conditions. A second digit of 7 means immersion in up to one meter of water for 30 minutes. So IP67, common on many smartphones, means a dust-tight phone that can handle a short submersion. IP68 also starts with a 6 for dust, but its water test goes beyond the IP67 baseline.
First digit: dust and solid particles
- 0 means no protection.
- 5 means dust protected: some dust may enter, but not enough to interfere with operation.
- 6 means dust-tight: no dust enters under the test conditions.
- X means no rating was submitted for this category.
Second digit: water and other liquids
- 0 means no protection.
- 1 means protection against dripping water.
- 2 means protection against dripping water when tilted.
- 3 means protection against spraying water.
- 4 means protection against splashing water from any direction.
- 5 means protection against water jets.
- 6 means protection against powerful water jets.
- 7 means immersion up to one meter for 30 minutes.
- 8 means immersion beyond one meter, with depth and time set by the manufacturer.
- X means no rating was submitted for this category.
Common ratings on phones and what they allow
IP67 and IP68 are the ratings most buyers associate with water-resistant phones. IP67 means a dust-tight phone rated for one meter of water for 30 minutes. IP68 also means dust-tight, but the exact depth and duration are set by the manufacturer, so the product specification matters. For example, the iPhone 16 carries an IP68 rating and is advertised to handle 20 feet of water for 30 minutes. The Pixel 9 also has IP68 and is rated for one meter of water for 30 minutes. The iPhone 15 and iPhone 16 share the same IP68 rating, even though other features differ. Flagship iPhones are marketed for longer submersion even though their IP ratings match rivals.
Not every phone with an IP rating is meant for immersion. Some 2026 models carry IP64 or IP65. Those ratings cover dust and water spray or jets, but they do not mean the phone can be submerged. Water resistance is strongest when the second digit is 7 or higher; lower values cover spray but not immersion. Lower ratings still have value: IP64 and IP65 phones can resist dust and water spray, which helps with rain and splashes. They are not immersion ratings, so a dunk in a sink or pool is a different risk. When a listing says IP-rated protection is supported, check the exact two digits rather than assuming full waterproofing. Display type and water resistance are separate specs; see OLED vs LCD Display: Smartphone Guide.
| Rating | Dust protection | Water protection |
|---|---|---|
| IP64 | Dust-tight | Splashing water |
| IP65 | Dust-tight | Water jets |
| IP67 | Dust-tight | 1 meter for 30 minutes |
| IP68 | Dust-tight | Manufacturer-defined depth and time |
What an X in an IP rating means
An X means no test or claim was submitted for that category. IPX4 means splash resistance from any direction has been tested, with no dust rating claimed. It does not automatically mean the device lacks dust protection; it only means no number was submitted for that category. This matters when comparing two phones, because a missing digit is not the same as a failed test.
Limits that an IP rating does not cover
An IP rating does not guarantee a phone will avoid water damage. Testing uses a new unit straight from the box. Seals wear over time, so a phone that passes a one-meter test when new may fail later. Everyday wear can affect seals. A rating therefore describes resistance at the time of testing, not a lifetime guarantee. Drop damage is not covered, because impact resistance is a separate issue. For IP8, the manufacturer sets depth and time, so the product specification shows the tested limits. Because 'waterproof' is not standardized on product labels, an IP rating provides a tested, comparable ingress-protection value. Water resistance is only one spec among many. RAM and storage affect multitasking and file capacity, as explained in What Is RAM vs Storage in Smartphones, and connectivity features such as eSIM can matter as much as ingress protection; see How eSIM works in Android phones.
How to use IP ratings when comparing phones
When water resistance matters most in a phone purchase, check manufacturers' IP-rating claims. Compare each phone's listed water-resistance details and test conditions instead of relying on words such as waterproof. Compare models by their stated water resistance and IP ratings where listed. Also compare the stated test conditions: one IP68 phone may be rated for a meter of water, while another is rated for a greater depth. The shared two-digit code does not mean identical performance. Wireless charging can reduce how often a port is exposed to water, but it is a separate feature; see How does wireless charging work on phones today. A higher IP rating is useful, but it should be weighed against battery life, display quality, and price.
Questions people also ask
Is IP68 better than IP67?
Yes for water, because IP68 covers immersion beyond the IP67 baseline, but the exact depth and time depend on the manufacturer. Both are dust-tight when the first digit is 6.
Does an IP rating make a phone waterproof?
No. It measures tested resistance to dust and water, and it does not make the phone immune to all water damage.
What does IPX4 mean?
It means splash resistance from any direction was tested, but dust protection was not officially claimed.
Can an IP rating wear out?
Yes. Ratings are tested on new devices, and seals can degrade with use, drops, and repairs.
Are IP64 and IP65 phones safe in rain?
They can handle splashes and water jets, but they are not rated for submersion, so prolonged immersion is risky.
Related pages
- How eSIM works in Android phones
An eSIM is a programmable chip built into a phone that stores your cellular account details in software. On Android, you add a carrier profile through settings, often by scanning a QR code, then choose which SIM handles calls, texts, and data. Travel plans can be installed before departure and activated when the phone reaches the destination network.
- OLED vs LCD Display: Smartphone Guide
OLED panels give each pixel its own light, so blacks look deeper and contrast is stronger. LCD panels use a backlight, which helps brightness in sun and often lowers price. The better choice depends on budget, viewing habits, and how long you keep a phone.
- How does wireless charging work on phones today
Wireless charging moves power from a charger to a phone through coils that create an electromagnetic field, most often under the Qi standard. Inductive systems need the phone to sit on or very close to the charger, while resonant systems work at a short distance. It is convenient for everyday top-ups, but a wired charger is still the better choice when speed matters.
- What Is RAM vs Storage in Smartphones
RAM is temporary working memory that holds active apps and data while a phone is on. Storage is non-volatile space that keeps the operating system, apps, photos, and files after power off. Both affect speed and capacity, but they solve different problems.
- PID Controllers in Robotics: How Motion Control Works
PID controllers in robotics compare a target motion with measured motion and combine proportional, integral, and derivative corrections to calculate a control command. The robot applies that command to a motor or other actuator, then repeats the measurement and correction as new sensor data arrives.
- Electricity transmission over long distances
Electricity transmission moves bulk power from generation sites to substations using high voltage, transformers, and interconnected lines. Raising voltage reduces current and resistive losses, while overhead and underground routes involve different costs, visibility, and repair trade-offs. Grid operators manage these networks, interconnections, and faults to keep power flowing across regions.
How this page was prepared
Before writing, the topic was researched in the sources below. The page then passed automatic quality checks.