How to Force Restart an iPhone: Every Model
Short answer
A force restart reboots an unresponsive iPhone at the hardware level and does not erase data. The button combination depends on the model: iPhone 8 and newer use Volume Up, Volume Down, then the Side button; iPhone 7 uses Side plus Volume Down; older Home button models use Home plus Side or Top. If the phone still does not start, charge it and try again.
Key points
- iPhone 8 and newer: press Volume Up, Volume Down, then hold Side until the Apple logo.
- iPhone 7 and 7 Plus: hold Side and Volume Down together.
- iPhone 6s and earlier with Home button: hold Home and Side or Top together.
- A force restart does not delete photos, messages, apps, or settings.
- Charge a dead iPhone for one hour before retrying.
How to force restart an iPhone when it is frozen
If you need to know how to force restart an iPhone, start with the model, because the button combination changed across generations. A force restart works at the hardware level, cutting power and starting iOS fresh, so it works even when the touchscreen is frozen or the screen is black. It takes about 15 seconds on newer models and does not delete photos, messages, apps, or settings.
Keep holding the final button until the Apple logo appears. On newer models, the 'slide to power off' screen may appear first; letting go at that point is the most common reason the sequence fails. If the iPhone does not restart after these steps, charge it and try again.
Restarting an iPhone 8 or newer by force
- Press and quickly release the Volume Up button.
- Press and quickly release the Volume Down button.
- Keep pressing the Side button until the Apple logo shows.
- If the 'slide to power off' screen appears, keep holding.
This sequence covers iPhone 8, iPhone X, iPhone 11, iPhone 12, iPhone 13, iPhone 14, iPhone 15, iPhone 16, iPhone 17, and iPhone SE (2nd and 3rd generation). The whole process takes about 15 seconds. If the screen stays black, the same steps still apply because the reboot happens below the software layer.
Force restart an iPhone 7 or iPhone 7 Plus
Press and hold the Side and Volume Down buttons together. Keep both buttons held until the Apple logo appears, which usually takes about 10 seconds. Release both buttons once the logo is visible.
Force restart an iPhone 6s or earlier with a Home button
Press and hold the Home button with the Side button, or the Top button on models whose power button is on top. Keep them held until the Apple logo appears, which usually takes about 10 seconds. Release both buttons once the logo is visible.
Button combinations by iPhone model
| Model group | Buttons to press | Typical time |
|---|---|---|
| iPhone 8, X, 11, 12, 13, 14, 15, 16, 17, SE (2nd and 3rd gen) | Volume Up, Volume Down, then Side button | About 15 seconds |
| iPhone 7 and 7 Plus | Side button plus Volume Down | About 10 seconds |
| iPhone 6s and earlier with Home button | Home button plus Side or Top button | About 10 seconds |
How to tell which button combination your iPhone needs
If you are unsure of the model, open Settings, tap General, then tap About and read the model name. You can also check the original box or receipt. iPhone 8 and later models do not have a circular Home button below the screen; iPhone 7 and 7 Plus have a solid-state Home button but still use the older combination; iPhone 6s and earlier have a mechanical Home button. This distinction matters because the Home button combination does not work on models without that button.
SE models follow the generation they are based on. The 2nd and 3rd generation iPhone SE use the iPhone 8-style combination: Volume Up, Volume Down, then Side. If you bought the phone second-hand, the model name in Settings is the reliable check.
What a force restart does and does not do
A force restart reboots the hardware. It does not erase data, and it is not a factory reset. Your photos, messages, apps, and settings remain as they were. A factory reset is a separate process that wipes the device and requires several deliberate confirmations in Settings. If you are comparing reset options on another platform, see how to factory reset an Android phone.
Because a force restart works below the software layer, it can recover a phone whose touchscreen has stopped responding. It is useful for a frozen app, a black screen, or a phone that will not react to taps.
Restart options compared
| Option | When to use | Data erased |
|---|---|---|
| Soft restart | Phone responds to touch | No |
| Force restart | Frozen or black screen | No |
| Factory reset | Erase and restore device | Yes |
When to use a soft restart instead
If the phone still responds to touch, a gentler soft restart is available: open Settings, choose General, move to the bottom, and tap Shut Down. Then slide to power off and turn the phone back on. This reboots a responsive phone but does not perform a true force restart.
Use the force method only when the normal shutdown path is unavailable. Repeated force restarts are a warning sign rather than a fix. If you need to force restart several times a day, check available storage, install pending iOS updates, and remove or update an app that freezes repeatedly. If you are troubleshooting a different device, see how to clear cache on an Android phone.
What to expect while the iPhone restarts
After the Apple logo appears, the phone boots iOS and returns to the lock screen. Your passcode, Face ID or Touch ID, and settings remain unchanged.
If the whole phone freezes repeatedly, check for an iOS update and review storage usage.
If the iPhone still will not turn on
Charge the iPhone for one hour, then try the force restart steps again. If the screen shows a low-charge battery, check the hardware and charge the phone for 30 minutes or until it starts. If the iPhone does not restart after you try these steps, consult Apple Support guidance for an iPhone that will not turn on or is frozen. If the iPhone is not working as expected after it restarts, consult the iPhone Support website.
When a force restart is not the right fix
A force restart helps when software has stopped responding.
Do not use a force restart as routine maintenance. It is a recovery tool for an unresponsive device. For a responsive phone, use the normal shutdown path in Settings. For a phone that needs data erased, use the factory reset process .
Common mistakes that make a force restart fail
The most common mistake is releasing the Side button too early, especially when the 'slide to power off' screen appears. Another mistake is pressing the volume buttons too slowly; on newer models they must be pressed and released quickly before the Side button is held. A third mistake is using the wrong combination for the model, such as holding Home on an iPhone that no longer has a Home button.
A force restart is not a factory reset. A force restart only reboots the phone. A factory reset erases data and requires confirmation. If the phone is responsive, use the normal shutdown path instead of forcing it.
Questions people also ask
Does a force restart delete data on an iPhone?
No. A force restart only reboots the hardware. Photos, messages, apps, and settings remain unchanged. Only a factory reset erases data.
How long should I hold the buttons?
On iPhone 8 and newer, the full sequence takes about 15 seconds. On iPhone 7 and older Home button models, holding the two buttons usually takes about 10 seconds until the Apple logo appears.
What if the Apple logo does not appear?
Charge the iPhone for one hour and try again. If a low-charge battery appears, charge for 30 minutes or until it starts. If it still does not restart, consult Apple Support guidance for an iPhone that will not turn on or is frozen.
Can I force restart an iPhone with a broken Side button?
No. The force restart methods require the physical buttons. If a button is broken, use the normal shutdown path if the screen responds, or seek repair.
Is a force restart the same as a factory reset?
No. A force restart reboots the phone. A factory reset erases data and requires several confirmations in Settings.
Related pages
- Update iPhone iOS: Complete Installation Guide
You can update an iPhone directly over Wi-Fi through the Settings menu or by connecting the device to a Mac or Windows computer. Standard updates preserve your files, installed applications, and personal configurations. Enabling automatic updates allows the phone to download and install releases overnight while connected to power and Wi-Fi.
- How to Reset an iPhone to Factory Settings
A factory reset erases apps, data, and settings and returns an iPhone to its original software state. Back up first, then use Erase All Content and Settings on the phone or a computer restore. Choose whether to keep or delete the eSIM before finishing.
- How to Free Up Storage Space on iPhone
Check iPhone Storage first, then remove unused apps, old photos and videos, downloaded media, and unneeded files. Offload Unused Apps and cloud backups can reclaim space without losing data.
- How to Use AirDrop on iPhone: Complete Guide
AirDrop sends photos, documents, and other files between nearby Apple devices over Wi-Fi and Bluetooth. This guide covers the sharing steps, receiving settings, the 10-minute Everyone option, AirDrop codes in iOS 26.2 or later, and child safety features.
- How to Back Up an iPhone to iCloud
To back up an iPhone to iCloud, turn on iCloud Backup in Settings and tap Back Up Now while connected to Wi-Fi. Automatic backups can keep a current copy without a computer, and the last backup date appears under Back Up Now.
- PID Controllers in Robotics: How Motion Control Works
PID controllers in robotics compare a target motion with measured motion and combine proportional, integral, and derivative corrections to calculate a control command. The robot applies that command to a motor or other actuator, then repeats the measurement and correction as new sensor data arrives.
How this page was prepared
Before writing, the topic was researched in the sources below. The page then passed automatic quality checks.