Siege of Jerusalem 1099: Capture and Aftermath
Short answer
During the First Crusade, a Christian army besieged Jerusalem, then under Fatimid control, for about five weeks and captured it in mid-July 1099. The victory was followed by widespread killing among the city’s Muslim and Jewish inhabitants and the establishment of Crusader rule.
Key points
- The Crusaders reached Jerusalem on June 7, 1099, with a depleted army and limited supplies.
- Fatimid governor Iftikhar ad-Dawla directed the city’s defence.
- Siege equipment, including towers and ladders, helped the attackers breach the walls.
- The capture was followed by widespread violence against Muslim and Jewish residents.
What happened during the siege of Jerusalem 1099?
The siege of Jerusalem 1099 was the First Crusade’s assault on a city held by the Fatimid Caliphate. Crusader forces arrived on June 7, 1099, after a long campaign across the eastern Mediterranean. They had reached the destination that had driven the expedition, but their army was far smaller and more depleted than the force that had left Europe.
The siege lasted roughly five weeks. The attackers brought up siege towers and ladders, eventually breaking into the city in mid-July. The Fatimid governor, Iftikhar ad-Dawla, surrendered to Raymond of Saint-Gilles, but entry by Crusader soldiers was followed by widespread killing. The conquest gave the Crusaders control of Jerusalem, while the violence made the capture catastrophic for many people living there.
Why did the Crusaders attack Jerusalem?
Jerusalem was the declared destination of the First Crusade, a military expedition launched from western Europe. For an explanation of the wider movement, see what the Crusades were about.
Before reaching Jerusalem, the army had fought its way through a difficult campaign and taken or passed through other places in the region. By the time it arrived, many people who had begun the journey were gone. The force described in the research notes included about 1,300 knights and 12,500 infantry, a limited number for an attack on a heavily fortified city.
The Crusaders also faced a deadline. They expected an Egyptian relief force to come to the city’s aid, as the possibility of reinforcements could make a long blockade dangerous. A prolonged siege might allow the defenders to hold out until outside troops arrived. The attackers therefore needed to breach the defences before time, thirst, and lack of food made their position worse.
How was Jerusalem defended?
Iftikhar ad-Dawla commanded the Fatimid defence. His garrison included Arab and Sudanese soldiers, with an Egyptian cavalry contingent. The defenders had stone-throwing machines, and Jerusalem’s walls were substantial: sections rose more than 18 metres and were about 3 metres thick. Towers and other fortified positions added further obstacles.
The city’s landscape strengthened its defences. Ravines, steep ground, and other natural barriers made approaches difficult on several sides. The attackers could not simply surround the walls and expect a quick entry; they had to move equipment into position and find a way past the fortifications.
Jerusalem had no spring or other water source inside the walls, but its cisterns could store water. The governor also removed livestock from the surrounding area and poisoned wells outside the city, denying the besiegers an easy local supply. Christians were expelled from the city as a precaution against possible cooperation with the attackers, while Jewish residents were allowed to remain.
How did the attackers break into the city?
The Crusaders first had to address shortages of water, food, and equipment. They lacked the resources for a comfortable, extended blockade, and the walls could not be overcome by a direct rush alone. The army gathered materials and constructed siege equipment, including towers that could bring attackers closer to the parapets. Ladders offered another way to reach the top of the walls.
These preparations required coordination. A siege tower had to be assembled and moved into position, while soldiers on the ground faced defenders trying to stop the approach. The Crusaders attacked the fortifications from more than one area, putting pressure on the city’s defences. The assault succeeded in mid-July, when their forces entered Jerusalem.
Accounts describe Tancred and Raymond as among those who entered the city. The governor surrendered to Raymond. Tancred had offered protection to people taking refuge at the Aqsa Mosque, but that promise did not prevent violence there. The attackers’ entry was not a controlled transfer of power that protected the population; the capture became a massacre.
What happened to Jerusalem’s inhabitants?
After the breach, Crusader soldiers killed large numbers of Muslims and Jews. The killings were widespread, though medieval reports do not provide a dependable, agreed total. The violence affected people in different parts of the city and occurred alongside changes to important religious buildings on the Temple Mount.
The Aqsa Mosque and the Dome of the Rock were converted for Christian use after the conquest. This change reflected the new rulers’ control of Jerusalem’s major religious sites. It also formed part of a larger transformation of the city’s public and political life under Crusader authority.
The massacre must be distinguished from the military act of taking the walls. The siege ended with a Crusader victory, but for residents who were killed or whose places of worship were seized, the outcome meant immediate loss and danger. Medieval accounts differ in their descriptions, and modern estimates of deaths are uncertain; a precise casualty figure should not be treated as established.
What changed after the capture?
Taking Jerusalem gave the Crusaders control of the city and helped them establish a new political presence in the region. The conquest became the foundation for the Kingdom of Jerusalem, a Crusader state that would face later conflicts with Muslim powers. The siege was therefore both a military episode and the beginning of a new phase of rule.
The victory did not end the Crusades or settle control of the Holy Land for good. Jerusalem changed hands in later wars.
These traditions do not erase the basic sequence: an under-supplied Crusader army reached a fortified city, breached its defences after several weeks, and took control amid severe violence against residents.
Why was the siege difficult for both sides?
The defenders had walls, fortified towers, and stored water, but they could not cover every stretch of the city’s defences with equal strength. Their position depended in part on holding out until help arrived. The Crusaders, meanwhile, faced an army shortage, inadequate supplies, and the prospect of an Egyptian counterattack. Neither side had an easy path to victory.
For the attackers, the decisive challenge was getting through the fortifications before their own shortages became unbearable. Siege towers and ladders helped solve that tactical problem. For the defenders, the breach meant that the city’s military resistance had failed; the surrender of the governor did not, however, shield the population from the violence that followed.
Questions people also ask
Who controlled Jerusalem before the siege?
Jerusalem was held by the Fatimid Caliphate. Its defence during the siege was directed by the governor, Iftikhar ad-Dawla.
How long did the siege last?
It lasted about five weeks, beginning with the Crusaders’ arrival on June 7, 1099, and ending with the city’s capture in mid-July.
How did the Crusaders enter Jerusalem?
They used siege equipment, including towers and ladders, to attack the city’s fortified walls. Their assault eventually opened a way into the city.
What happened after Jerusalem was captured?
Widespread killings of Muslim and Jewish residents followed the entry of Crusader forces. The Aqsa Mosque and Dome of the Rock were also converted for Christian use.
Related pages
- What Was the Battle of Hattin?
On 4 July 1187, Saladin's Ayyubid forces destroyed the Crusader field army of Guy de Lusignan near the Horns of Hattin in northern Palestine. The defeat broke the Kingdom of Jerusalem's military power and opened the way for Saladin to reconquer Jerusalem.
- Who was Saladin in the Crusades? Ayyubid Sultan
Saladin, born Yusuf ibn Ayyub in Tikrit in 1137 or 1138, was a Kurdish Sunni ruler who became sultan of Egypt and Syria. He defeated a large Crusader army at the Battle of Hattin in 1187 and captured Jerusalem, ending almost nine decades of Frankish control. His Ayyubid realm stretched from Egypt to Arabia at its height.
- What Were the Crusades About? History and Meaning
The Crusades were medieval military campaigns launched by the papacy, beginning in 1095, to recover and defend the Holy Land. They were religious wars between Christians and Muslims over sites sacred to both groups. They also created knightly orders and later crusades against other enemies of the Church.
- Kingdom of Jerusalem: Crusader State in the Levant
The Kingdom of Jerusalem was a Crusader state created in 1099 after the First Crusade. It ruled territory in Palestine and Jordan, lost Jerusalem to Saladin in 1187, was re-established at Acre in 1192, and ended on the mainland after the loss of Arwad in 1302 to 1303.
- Seljuk Architecture: Forms, Materials, and Legacy
Seljuk architecture is the building tradition associated with Seljuk rule from the 11th to the 13th centuries. It combined regional construction practices with distinctive forms such as the four-iwan mosque plan, domed spaces, monumental portals, and, especially in Anatolia, richly carved stone.
- Persian Empire Battles: Key Conflicts Explained
The best-known Persian Empire battles took place during the Greco-Persian Wars, a series of conflicts between the Achaemenid Empire and Greek states from 499 to 449 BCE. Major events included the attack on Sardis and the battles of Marathon, Thermopylae, Salamis, and Mycale, as well as the Greek-led counteroffensive.
How this page was prepared
Before writing, the topic was researched in the sources below. The page then passed automatic quality checks.