Wesloo
All topicsTopics

Android

Enable Developer Options Android: Step-by-Step Guide

Short answer

Developer options are hidden by default on Android 4.2 and later. Tap Build Number seven times, confirm if asked, then open the menu from Settings. Use the settings carefully and disable them when finished.

Key points

  • Tap Build Number seven times to reveal Developer options.
  • The menu path varies by Android version and device maker.
  • USB debugging enables adb communication with a computer.
  • OEM unlocking is only needed for bootloader and custom ROM work.
  • Turn the main switch off when finished for security.

What developer options are

Developer options is a hidden Settings screen for profiling and debugging app performance. It can turn on USB debugging, capture a bug report, show tap feedback, flash window surfaces when they update, and use the GPU for 2D graphics rendering. Android 4.1 and lower show it by default; Android 4.2 and higher hide it until you unlock it. The menu is intended for developers, but it can also expose extra device information and customization controls.

How to enable developer options Android

To enable developer options Android, open Settings, find Build Number, and tap it seven times. You should see a message saying you are now a developer. On some phones, open Android Version or Software Information first to find Build Number. If your phone asks for a PIN, password, or pattern, enter it to confirm authorization.

The menu location after unlocking depends on Android version and manufacturer. Use the paths below as a starting point, then look for Developer options in Settings or System if your device differs. Searching Settings for "Developer options" is often faster than browsing every menu.

Android 12 and Android 13

  1. Open Settings.
  2. Scroll down, then tap About phone.
  3. Tap the Build number entry seven times.
  4. Enter your device credentials to confirm.
  5. Go back to Settings, then System, then Developer options.

Android 10 and Android 11

  1. Open Settings.
  2. Tap System, then About phone. On some devices, About phone appears directly.
  3. Tap Build number seven times.
  4. Return to Settings, then System, then Advanced, then Developer options.

Android 4.2 through Android 9

Open Settings, find About phone or About device, tap Build number seven times, then look for Developer options under Settings or System. The exact label varies by manufacturer, so search Settings for "Developer options" if the menu is not obvious. The general process applies to phones running Android 7 and later, while older versions may show the menu by default.

At the top of Developer options, keep the main switch on. When it is off, most options stop working, except settings that do not need the device to talk to your development computer. This distinction matters because some settings can still be changed while the main switch is off.

Settings worth knowing after unlocking

Developer options contains many switches. Change only settings you understand, because unintended changes can affect device stability. Common examples include USB debugging, bug report capture, tap visual feedback, window surface flashing, and GPU use for 2D graphics rendering.

  • USB debugging: lets Android Studio and other SDK tools talk to the device through adb.
  • Wireless debugging: allows pairing and debugging over Wi-Fi instead of a cable.
  • GPU debug layers: available on Android 9 and higher; allows Vulkan validation layers to load from local device storage.
  • Wait for Debugger: unavailable until you choose an app with Select debug app; when enabled, the chosen app pauses until the debugger attaches before running.

If you are installing apps from outside an app store, see How to Install APK Files on Android for the separate install permission steps. Developer options does not replace those permissions.

USB debugging and adb

USB debugging is the setting most people need. It lets your development machine talk to the phone through Android Debug Bridge. You can find it under Developer options, but its exact location depends on Android version. Enable it before using Android Studio, adb commands, or device pairing tools.

For wireless work, enable Wi-Fi debugging in the same menu. Both options are under Developer options, and their placement can vary by version. Disable USB debugging before charging from public or unfamiliar USB sources, because an unauthorized computer could extract data or install unwanted packages during charging. An unauthorized computer could extract data or install unwanted packages while the phone charges.

Revoke USB debugging authorizations periodically if you connect to many computers. This wipes stored RSA computer keys and requires explicit approval when a cable is connected again. It is a simple way to remove old trust relationships. If you use one trusted computer, you can leave the authorization in place.

OEM unlocking and bootloader access

OEM unlocking permits bootloader unlocking for custom Android systems or other low-level modifications. That is required to install custom Android operating systems, often called flashing custom ROMs, or other low-level system changes. Keep it disabled unless you are actively preparing for that work. Leaving it enabled reduces protection if the device is lost or stolen.

Do not confuse OEM unlocking with ordinary app debugging. USB debugging is for development tools; OEM unlocking changes boot-level security. If you only need to test an app, leave OEM unlocking off. Most users never need this setting.

Security and stability precautions

Developer mode is an advanced settings menu mainly used by developers. It can also expose extra customization and device information. Because it provides low-level access, treat changes carefully.

  • Change only settings you understand.
  • Turn off USB debugging in public places.
  • Revoke USB debugging authorizations when you no longer need old computers.
  • Keep OEM unlocking disabled unless flashing a custom ROM or kernel.
  • Avoid third-party utilities that claim to enable developer settings or boost performance. Legitimate developer configurations are built into Android and need no third-party software.

Some apps may act differently or refuse to run while developer options are enabled. If an app fails after you unlock the menu, disable developer options and test again. For broader device troubleshooting, What Is Android Recovery Mode? explains another built-in diagnostic path.

How to disable developer options

When you finish experimenting, disable developer mode to maintain security and stability. Disable developer mode by turning off the top-level Developer Options toggle in the menu. This disables all developer settings at once. You do not need to tap Build Number again to hide the menu; the switch controls whether the settings are active.

The switch is the normal way to turn it off. For reset steps, see How to Factory Reset an Android Phone. Disabling the switch is enough for most users.

When the menu does not appear

If Developer options does not appear after seven taps, check that you tapped the correct Build Number entry. On some devices you must open Android Version or Software Information first. Also check whether a work profile, device policy, or manufacturer skin changes the Settings layout. Search Settings for "Developer" before repeating the taps.

Do not install apps that promise to unlock developer mode. All legitimate configuration is native to Android. If a device is managed by an employer or school, the menu may be restricted by policy. In that case, contact the administrator instead of trying workarounds.

Developer options is one of several built-in tools. If you are clearing storage or fixing app issues, How to Clear Cache on Android Phone covers a safer first step than changing low-level settings. Keep developer changes separate from routine maintenance so you can tell which change caused a problem.

Questions people also ask

Do I need developer options to use adb?

USB debugging under Developer options is required for adb communication with a computer. Wireless debugging can also be enabled there. Without it, most adb commands cannot connect.

Is it safe to leave developer options on?

It can be safe if you change only settings you understand. Some apps may behave differently or refuse to run while it is enabled. Turn it off when you no longer need it.

Why is Build Number hidden on my phone?

On Android 4.2 and higher, Build Number is hidden by default to prevent accidental changes. You reveal Developer options by tapping it seven times. The exact menu path varies by device.

What does OEM unlocking do?

It allows bootloader unlocking for custom ROMs or low-level system modifications. It should stay off unless you are actively preparing that work. Leaving it on reduces protection if the device is lost.

Related pages

  • Free Up Storage Android: Clear Space Fast

    Android storage fills with photos, app cache, downloads, and leftover data. Clearing cache, removing unused apps, backing up media, and managing downloads can recover gigabytes. Keep 10-15% of storage free so updates and temporary files work properly.

  • Backup Android Phone: Complete Guide

    You can back up an Android phone to your Google Account, choose photos and device data, and restore it during setup or after a factory reset. Backups can take up to 24 hours, need Android 8 or higher, and may expire if the device is unused for more than 57 days.

  • What Is Android Recovery Mode?

    Android recovery mode is a maintenance environment that runs separately from the normal operating system. It can factory reset a device, clear cached data, apply updates, and help diagnose boot problems.

  • How to Install APK Files on Android

    An APK file installs an Android app from outside Google Play Store. Android blocks unknown sources by default, so you must grant permission to the app that opens the APK, then locate and tap the file to install it.

  • How to Clear Cache on Android Phone

    Clearing cache removes temporary app and browser files without deleting photos, messages, or logins. Use per-app clearing for one faulty app, bulk storage tools for all apps, and Recovery Mode only for whole-device problems.

  • How to Factory Reset an Android Phone

    A factory reset erases personal data and returns an Android phone to its original state. Before resetting, back up anything you want to keep, confirm your Google account password and screen lock, and charge or plug in the phone. You can then reset through Settings, hardware buttons, or a remote erase command.

How this page was prepared

Before writing, the topic was researched in the sources below. The page then passed automatic quality checks.

Report a mistake on this page